Gerbing Gyde Thermite Heated Fleece Jacket for Women, Camouflage - 7V Battery (Size S)

Gyde heated fleece jackets are powered by Gerbing's patented Microwire heating technology to provide maximum warmth and performance. This comfortable heated jacket includes a rechargeable 7V lithium-ion battery for hours of on-demand heat. Activate the heating elements with the touch of a button and experience warmth and comfort like never before. Our fleece program is composed of a deep, soft pile obtained by heavily napping with wire brushes. It is a two-sided pile fleece, which provides air space giving good insulating properties without too much weight. A lightweight, warm, soft fabric, with hydrophobic attributes and holds less than 1% of its weight in water. It retains much of its insulating properties, even when wet. Unlike other synthetic fleece, polyester fleece is known for its ability to resist pilling, even after extended use. To update the fleece, we developed a honeycomb structure to give the fabric a more unique look, while maintaining functionality. Women\xCDs Thermite Battery Heated Fleece Jacket:

• Exceptional warmth with lofted anti-pill fleece composition
• Core fibers help conserve heat and wick moisture away from the body
• Hydrophobic properties hold less than 1% of its weight in water
• Four Microwire\xBB heating zones: collar, chest (2), and back
• Reaches temperatures up to 135\xC1 F
• Equipped with a dual mode 7 volt battery and wall charger
• Ideal mid-layer or outerwear piece
• Four Zone Heated for Targeted Warmth: Neck, Chest (2), Back

Gerbing\xCDs Gyde Heated Jacket Includes :

• 7V Rechargeable Battery
• Charger
• Instructions
• Warranty

 How to measure for Gerbing Jackets and Vests properly:

The measuring process is very important and will help make sure you order the correct size.  The tape measure should fit snugly against the body. Remember, any Gerbing liner is meant to be worn under outerwear clothing.

• Chest - Measure around the fullest area of the chest, holding tape firm and level. Hold arms out, place tape, drop arms and record measurement.
• Waist - Measure loosely at your natural waistline, typically above your beltline and closer to your bellybutton.
• Hips - Measure around the fullest part of seat while standing and while sitting. Record the higher number.
• Outseam - Measure from the top of the waistband to the bottom of the ankle, remember pants and pant liners will lose some length when in the sitting or riding position.
• Sleeve Length - Measure from the top of the shoulder bone to the bottom of the wrist bone. Measure both arms as one arm may be longer than the other. 

COREHEAT 7 INSTRUCTIONS - HOW TO POWER YOUR HEATED GEAR

Battery/Power Outlet

All garments come with a 7v Lithium Ion rechargeable battery and wall charger.

Additional 7v batteries can be purchased separately. Total battery weight: 4 ounces.

Each Battery has 4 settings and is indicated on the battery by a set of red lights:

• 100% (4 red lights)
• 75% (3 red lights)
• 50% (2 red lights)
• 25% (1 red lights)

The 7v battery holds anywhere from 2 to 8 hours of heat, depending on the setting.

• 2 hours at 100%
• 3 hours at 75%
• 5 hours at 50%
• 8 hours at 25%

Operation

• Step 1: Power on by pressing and HOLDING (2-4 seconds) power button
• Step 2: To change temperature, press and hold power button until LED light reflects desired setting. *Power level setting can only be indicated when connected to garment.
• Step 3: Check remaining battery life by disconnecting battery from product. Press and hold power button, LED indicator will show 1­4 LED lights to indicate remaining power (4 lights is full power).

Charging Battery

• We recommend charging overnight for first charge.
• Charge 100% before use (a full charge takes about 3-4 hours).
• A red light will appear on wall charger when charging. If light does not change or turn on, it may still be charging, so please test the battery in product after 3-4 hours.
• Maintain at least 25% power when battery is not in use.

Instructions for Silicone Switches

• Step 1: Plug in fully charged battery.
• Step 2: Switch will cycle through settings, this indicates switch has power and can now be used.
• Step 3: To power on, push and hold down button for 2­3 seconds until the switch illuminates.
• Step 4: To change power setting, tap button to cycle through levels.

                               ○Low = Green        ○Medium = Yellow              ○High = Red

• Step 5: To power off, push and hold down button until light goes out.